HVAC Economizers in Long Island

HVAC economizers are called DDC systems in industry parlance. DDC stands for Direct Digital Control, basically computerized controls of HVAC air handlers instead of using mechanical systems to control the use of the air handler and other components. Computer technology has been able to provide dramatic energy savings for years, but the real advance recently is the ease of use for air conditioning services Long Island technicians.

Instead of being pre-installed at the factory, now your HVAC technician can modify the DDC settings on site. This is a powerful new tool for Long Island HVAC companies because they can customize air handler use or program zone control by site. Economizers do need extra ductwork and equipment to maximize their efficiency. One way economizers do this is by using outside air for heating or cooling when the conditions are right. When the outside air is at a temperature compatible with your comfort settings, there is no reason to use mechanical heating or cooling to do extra work.

Commercial building codes in Long Island  require a certain amount of air to be circulated through the building every hour. There is no need to treat the excess air needed beyond the heating requirements. The dampers that control this excess air are often inadequate compared to digital economizers. If not calibrated after installation, these dampers often malfunction to the point that the building owners disable the devices within a year.

A common economizer in furnaces uses the heat from exhaust flue gases to make full use of boiler energy. These units are not overly complicated but it might be easier to use a specialty furnaces services company for these kinds of installations or repairs. The economizer digital controls should work directly with the HVAC control system. These new digital units spit out charts and graphs of performance and can be monitored remotely.

In order for the DDC economizer to do its job correctly, it needs inputs, or information gathering sources so it can see how the HVAC system and the interior of the building are operating. One sensor should be a CO2 sensor inside the building. This allows the air handler to decide when to operate without an air damper. When C02 is at safe levels, the system will re-condition the air, significantly saving energy venting cooled air outside. The sensor is built to override everything else for safety. Two more sensors should gather outside air temperature and humidity. One way the unit can maintain good indoor air quality is to keep the building at slight pressure. This stops air infiltration which can lead to unwanted moisture or pollutants in the building.